Landing area of The whole set machine is 32m(L)*15m(W)*10m(H).The type of the reactor is continuous type , you can control the feeding material capacity with the transducer ,from 5T-30T capacity.
Equipped with PLC system, tyre cutter machine , shredder , nitrogen making machine etc. High automatically and safety for the whole processing line.
The source material is continuously fed into pyrolysis reactor, where it decomposes under heating in a primarily non-reactive environment. Lower section of the reactor is drying zone, middle and upper section is pyrolysis zone.
1.Paste and solid waste is fed by screw conveyor from the hopper , which is equipped with the level transmitter that controls safe continuous feeding, eliminating the possibility of oxygen entering the reactor
2.Liquid waste is fed from receiver tank by the pump, which is equipped with level transmitter and heating element to lower the viscosity of the sludge
3.The pyrolysis reactor is heated to the operation temperature by the mixed fuel burner installed in furnace
4.The pressure in the reactor is controlled by temperature rise rate
Diesel fuel/or produced boiler fuel is used for the plant operation
5.Fuel is self-fed from fuel tank
6.Air is fed to the burner while operation on diesel or heavy fuel oil
Nitrogen is used for the emergency shutdown of the process and controlling the pressure-vacuum conditions in the reactor of feed failure or air leak into reactor
Delivery & Packing detail for the tyre pyrolysis plant
Our company& factory outlook, our factory address is xinxiang city , henan province , China , the nearest airport is zhengzhou national Airport , we would pick u up at the airport if you come to visit our factory.
If you are interested of this machine , pleases contact for more information.
|Pessoa de Contato :||daisy|